Free Solidworks Video Tutorial Series

This free Solidworks tutorials series is for you if you are an absolute beginner and want to learn Solidworks from scratch without spending anything.

In this free video series, you will learn Solidworks from the basics of the user interface, units, and sketches to basic 3D modelling and finally advanced 3D modelling with practice exercises and MCQ quizzes.

The videos in this free series are made with the 2021 and 2022 versions of Solidworks and it is great for users who are using even the older version of the software.

Download Lesson files

Part 1 – Solidworks introduction

Part 1 – Getting started

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 5

1. Which key combination allows panning in Solidworks?

2 / 5

2. Which of the following option can be used to change the orientation of a part with respect to any of its planes?

3 / 5

3. Which of the following short key can be used for the command shortcut panel?

4 / 5

4. A drawing is made in inches and later unit of the document is changed to mm, what will happen to the drawing after making changes in the unit?

5 / 5

5. Where is the template folder setting located?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Part 2 – Sketching introduction

Part 2 – Sketching

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 5

1. Which of the following is the property of a fully defined sketch?

2 / 5

2. To exit the line tool and repeat it again which of the following shortcut option can be used?

3 / 5

3. To apply dimension constraint on two circles from circumference to circumference which of the following shortcut key can be used?

4 / 5

4. What is the polygon type in the following image?

5 / 5

5. Is it possible to apply geometric constraints like horizontal and vertical on Spline handles?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Part 3 – Modifying sketches

Part 3 – Modifying sketch

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 5

1. What will happen when you extend an arc using extend tool?

2 / 5

2. Is it possible to use the cap ends feature of the offset tool on closed sketches?

3 / 5

3. Which of the following checkbox should be selected to convert the main geometry into a construction geometry after creating an offset?

4 / 5

4. When making a sketch copy which of the following option maintains the constraint of the object to be copied?

5 / 5

5. Is it possible to add a negative rotation angle value when rotating a sketch entity?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Part 4 – Part modeling

Part 4 – Part modeling

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 5

5. A chamfer as shown in the following image is added to the edge of the 3D part. Which of the following options of the chamfer tool will maintain the cylindrical shape even after adding the chamfer?

2 / 5

4. For which of the following fillet options you don’t need a radius value?

3 / 5

3. Which of the following option will let you create a fillet of variable radius along the same edge?

4 / 5

2. To extrude the sketch marked A up to the plane marked B which of the following option can be used?

5 / 5

1. Which of the following feature can be used to extrude the sketch along the sketch boundary only?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Part 5 – Drawing tools

Part 5 – Drawing tools

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 5

1. To make a reference plan two intersecting planes are selected, what will be the direction of final plane thus created?

2 / 5

2. Using which of the following option you can check the physical properties of a body like mass and density?

3 / 5

3. On a solid body “Oak wood” appearance is applied. Later the appearance is changed to “Galvanized steel” on the same body. What will happen to the mass property of that body?

4 / 5

4. Which of the following option of pattern tool can be used to create a pattern that changes shape as per the part boundary?

5 / 5

5. In which of the following situation combine tool will not work?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Part 6 – Advance Tools

Part 6 – Advance tools

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 5

1. State true or false: Loft centreline needs to pass through the exact centre of all the loft cross sections.

2 / 5

2. Which of the following option can be used to merge the ends of open loft feature?

3 / 5

3. In the following image a loft is created using two closed profiles.

The curve marked with a green arrow is used as a guide curve. To influence the shape of the profile up to the corner marked with a red arrow which of the following guide curve influence option can be used?

4 / 5

4. Which of the following influences the shape of the 3D part equally?

5 / 5

5. Is it possible to create a shell without selecting any face of the 3D feature?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Part 7 – Practice exercises

Part 6 – Advance tools

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 5

1. State true or false: Loft centreline needs to pass through the exact centre of all the loft cross sections.

2 / 5

2. Which of the following option can be used to merge the ends of open loft feature?

3 / 5

3. In the following image a loft is created using two closed profiles.

The curve marked with a green arrow is used as a guide curve. To influence the shape of the profile up to the corner marked with a red arrow which of the following guide curve influence option can be used?

4 / 5

4. Which of the following influences the shape of the 3D part equally?

5 / 5

5. Is it possible to create a shell without selecting any face of the 3D feature?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Get all the lesson files used in this free Solidworks tutorial series

You need to confirm your email before downloading

Learn More

Did you like Solidworks free tutorial series? if you did then I am sure you will also like these free video tutorial series as well.