AutoCAD 2D and 3D Quizzes With Answers

This eBook contains more than 100 AutoCAD quizzes from 2D and 3D workspaces with answers.

Download the book for free using the button shown down below.

PDF Format

46 Pages

First Edition

2.66 MB

This is a huge collection of more than 100 AutoCAD 2D and 3D quizzes in multiple-choice format with answers. The total score of your quiz will show up after you answer all the questions of a section.

You can use this quiz series in your classroom for the assessment of your students and also for assessing your AutoCAD knowledge. To learn AutoCAD from scratch you can start with our completely free AutoCAD tutorial series here.

Introduction to AutoCAD

Part 1 – Introduction to AutoCAD

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 10

1. The extension for the AutoCAD drawing file is?

2 / 10

2. What is the keyboard shortcut for saving AutoCAD drawing?

3 / 10

3. The extension for the AutoCAD template file is?

4 / 10

4. The command for opening “drawing units” window is?

5 / 10

5. Whenever you save a drawing a new backup file is created which contains file without changes, what is the extension of that backup file?

6 / 10

6. To fit all drawing objects in the visible drawing area you need to select?

7 / 10

7. The shortcut for using the Zoom command is?

8 / 10

8. If AutoCAD is displaying the length of a line as 24.952 then what is the precision selected?

9 / 10

9. The default workspace in AutoCAD 2016 is?

10 / 10

10. How can you access the PAN tool of AutoCAD?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Creating Drawings

Part 2 – Basic draw commands

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 10

1. Which symbol can be used to specify the angle for making an inclined line?

2 / 10

2. AutoCAD circle flyout on the draw panel offers how many ways to make a circle?

3 / 10

3. Which option will you use to make a circle which is tangent to a line and circle and has a certain radius value?

4 / 10

4. What is the command for starting a rectangle?

5 / 10

5. The shortcut for starting the polyline command is?

6 / 10

6. What is the maximum number of sides with which a polygon can be made in AutoCAD?

7 / 10

7. In the image shown here, the polygon is inscribed or circumscribed about the green circle?

8 / 10

8. Is it possible to make a rectangle with fillets on all four vertices?

9 / 10

9. Can you use the Polygon tool to make a polygon with a known edge length without using an inscribed or circumscribed circle as a reference?

10 / 10

10. To make the arc as shown in the image here which Arc command can be most effectively used?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Modifying and Manipulating Drawings

Part 3 – Basic modify commands

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 10

1. State true or false: It is not possible to make a linear array with copy command

2 / 10

2. State true or false: An object is selected only if the crossing window or polygon completely encloses it.

3 / 10

3. What should be the angle of the horizontal line so as to rotate it to the position of the green line?

4 / 10

4. In the image shown here, what is the offset distance between both closed geometries?

5 / 10

5. To reduce the size of an object to half of its initial value using the SCALE command the scale factor would be?

6 / 10

6. What is the result of using the POLYLINE sub-command of the FILLET command?

7 / 10

7. As per the array command of AutoCAD, what is the row gap between rectangles in this array?

8 / 10

8. To break a Polyline into lines and arcs which command can be used?

9 / 10

9. The command for the trim tool is?

10 / 10

10. As per the array command of AutoCAD, what is the column gap between rectangles in this array?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Drawing Tools

Part 4 – Drawing tools

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 10

1. What will you use on the command line to make a line with a length of 8 units at an angle of 60 degrees with respect to the positive direction of the X axis, assuming you use line command and the first point of the line is not at the origin?

2 / 10

2. What is the name of the status bar icon encircled in red?

3 / 10

3. Which option of the status bar will activate the Tooltip as shown on the cursor?

4 / 10

4. State True or False: You can change the polar tracking angle to any angle of your choice.

5 / 10

5. What will you enter on the command line to make a rectangle using the RECTANGLE tool with a length of 6 units (along the X axis) and width of 4 units (along the Y axis), the rectangle is not starting at the origin point.

6 / 10

6. To fill the closed area with a single color which hatch pattern will you use?

7 / 10

7. Which function key enables object snap in AutoCAD?

8 / 10

8. Which factor of hatch command you will change to correct the spacing between hatch lines or patterns?

9 / 10

9. Which object snap tool was added in AutoCAD 2016 version?

10 / 10

10. To toggle between different fields of dynamic input which key can be used?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Dimensioning and Text

Part 5 – Drawing features and properties

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 10

1. Which option of layer properties is indicated by the light bulb icon here?

2 / 10

2. To change a block into a normal drawing object which command can be used?

3 / 10

3. Which layer is automatically created when a dimension is added to the drawing?

4 / 10

4. Which of the following layer can be deleted from the layer property manager palette?

5 / 10

5. What is the highest value of layer transparency?

6 / 10

6. State True or False: You can’t insert an xRef which has the same name as a block in the drawing.

7 / 10

7. State True or False: If you select "retain" or "delete" from objects panel of create block window then block will not be created.

8 / 10

8. State True or False: An image can be attached as an xRef in the drawing.

9 / 10

9. Which among the following is not true for an xRef?

10 / 10

10. Make a circle with a radius of 5 units in AutoCAD, then make a layer and name it Drg and give this layer Red color. Now place the circle on the Drg layer then select the circle and change its color to green from properties palette. What is the final color of the circle now?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Layer, Block and xRef

Part 6 – Dimensioning and annotations

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 10

1. What is the command for starting text style dialogue box?

2 / 10

2. What is the type of dimensioning used in the drawing shown in the image?

3 / 10

3. In the image shown here, extension line of linear dimension is indicated by which color?

4 / 10

4. Which one is not a command for single-line text?

5 / 10

5. In order to align Multileader of drawing A to the configuration of drawing B which command can be used?

6 / 10

6. What is the name of dimension type shown in this image?

7 / 10

7. Which command among the following cannot be used for editing MTEXT?

8 / 10

8. What is the command for starting table in AutoCAD?

9 / 10

9. What is the command for starting a multileader tool?

10 / 10

10. Symbol tool can be found on which panel of MLINE text editor?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Preparing Layout and Plotting

Part 7 – Reusable objects and printing

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 5

1. Which among them is not an option for starting the print command?

2 / 5

2. Which orientation is landscape among A and B?

3 / 5

3. To plot all layouts at once which command you can use?

4 / 5

4. To plot only a particular portion of a drawing which option can be selected in plot area panel of PLOT window?

5 / 5

5. How can you change the size of the drawing in your final PLOT?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Introduction to 3D solid modeling

Part 8 – Introduction to 3D solid modeling

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 10

1. What is the alternative method of using the orbit tool?

2 / 10

2. What will happen if you use the solid extrude command on an open 2D geometry

3 / 10

3. To create a shape as shown here, which command can be used most efficiently?

4 / 10

4. State true or false: Presspull command can be used to create a groove in an existing geometry.

5 / 10

5. Which command can be most efficiently used to make this geometry?

6 / 10

6. Which tool makes this green circle?

7 / 10

7. How many workspaces are available in AutoCAD for 3D drawing?

8 / 10

8. Which zoom command will you use to bring a selected area of drawing into view?

9 / 10

9. Which of the following 2D geometry is used to make this 3D shape using Revolve command?

10 / 10

10. Is it possible to save the orientation of geometries in the drawing as views?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Editing and visualizing solids

Part 9 – Editing and visualizing solids

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 10

1. To create Fillet or Chamfer on all connected edges of a 3D solid which subcommand is used?

2 / 10

2. State True or False: Using Move Face command a groove can be moved to a different point on the 3D solid.

3 / 10

3. Which one of the following is not a Boolean operation in AutoCAD 3D

4 / 10

4. To make a geometry on a surface other than on XY plane which status bar tool can be used?

5 / 10

5. If an array is made as associative then which of the following statement is false?

6 / 10

6. To extract the common region between two interfering solids which Boolean operation can be used?

7 / 10

7. When applying the 3D fillet the grip shown in the image appears, what can be done with it?

8 / 10

8. Which subcommand of the Extrude command can be used to make this solid?

9 / 10

9. Which coordinate option can be used to reset the orientation of UCS to its default?

10 / 10

10. Which of the following tool cannot be used to make 2D views from 3D drawing?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Surface Modeling

Part 10 – Surface Modeling

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 5

1. Which of these is not a surface tool?

2 / 5

2. Is it possible to create a surface from closed Polyline geometry by using solid Extrude command?

3 / 5

3. What will happen if you create a surface using 2D geometry with surface associativity turned on and then delete the 2D geometry.

4 / 5

4. Is it possible to create a surface offset on both sides of the surface simultaneously?

5 / 5

5. Patch command can be used in which of the following situations?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

Rendering and Presentation

Part 11 – Rendering and Presentation

  • The questions are in multiple-choice format with only one correct answer.
  • You can check the result after answering all the questions in this section.
  • You can change your answer as many times as you like before submitting your quiz.

1 / 10

1. To fine tune the position of camera efficiently which tool can be used?

2 / 10

2. State true or false: It is not possible to apply materials to all objects on a Layer.

3 / 10

3. Which one among the following is not an advantage of using Low quality render preset?

4 / 10

4. Which format is not supported for creating an animated walkthrough video in AutoCAD?

5 / 10

5. In which of the following formats the rendering cannot be saved?

6 / 10

6. Is it possible to modify the properties of materials in AutoCAD materials library?

7 / 10

7. Which Visual style is applied to the cuboid shown here?

8 / 10

8. Which of the following factor does not affect the time taken to generate a rendering?

9 / 10

9. Is it possible to set exact date and time of exterior lighting conditions for creating realistic renderings?

10 / 10

10. Which of the following is not an advantage of creating rendering with an A360 cloud account?

One last step, share your email and we will send you the detailed result of this quiz.

Your score is

So that was our AutoCAD quiz collection, click the button down below to download this entire collection as a PDF eBook.

To learn AutoCAD from scratch check our collection of AutoCAD courses and video tutorial series here.

Get your free copy of AutoCAD Quizzes PDF eBook

This eBook contains more than 100 AutoCAD quizzes from 2D and 3D workspaces with answers.

Download Now

You need to confirm your email before downloading